JGS Ceramic Nozzles High quality, high density, high alumina ceramic nozzles outwear, cut faster and break less then any other cermaic nozzle. If speed, economy and precison are what you're looking for, look no further then these nozzles.

Available in #1 1/8", #1 3/16", #1 5/32", #1 1/4", #2 1/8", #2 3/32", #3 3/32",

#3L 3/32", and #3L 5/64".

Norton Norbide Cone and Flange Nozzle   The cone or flange shaped Boron Carbide Nozzles are the longest lasting and most durable straight bore nozzles available. Unmatched for economical sandblasting. Ask for quotes.

Available in 1/8", 5/32", 3/16" and 1/4".

Material: NORBIDE is Norton's                         TIP: Rotate nozzle 1/4 turn every

Trademark for boron carbide--one                    week or two; this will make your

of the hardest materials commercially               nozzles last much longer.

available.

         Norbide Cone     Norbide Flange  

Norton Norbide Venturi   Although priced higher than straight bore NORBIDE nozzles, the Norton Venturi monumental nozzle increases rate of cut up to 50%. The new entrance and exit balance design (see below) means more cut with each individual grain. This provides a reduction in abrasvie material usuage and increases production because of a more uniform blasting pattern, especially when used with an automatic curtain.

Light, Shock-Resitant Jacket the lightweight anodized aluminum jacket has the hardness of cold rolled steel which virtually eliminates breakage.

Available for immediate shipment in 3/16", 1/4", 5/16" and 3/8".

Norton Venturi     

                                                                            With the Norton Venturi design,

                                                                              grain acceleration is doubled.

Shape Carving Tip:

"When an erratic abrasive pattern develops, check both the nozzle

and the pipe or nipple leading to the nozzle. A worn pipe or nipple might be the culprit."